How To Install Hvac Round Vent Register In Drop Ceiling

Adding a Vent in a Dropped Indoor Ceiling

When calculation a dropped ceiling to a room, yous demand to take into account any vents or heating ducts that are functioning above information technology. If y'all don't make arrangements to incorporate these into your dropped ceiling, you volition be heating and cooling the dead space over the ceiling. Fortunately, information technology'southward an easy job to extend vents and pipes so that they go through the dropped ceiling and send hot and cool air where information technology'south supposed to go.

Ceiling vents facilitate airflow.

Step 01

Measure the dimensions of your vent embrace. Note that the vent cover has sides that will extend through the dropped ceiling panel and flanges that will be pressed against the face. Don't cut the hole to the size of the flanges, or the vent embrace volition get right through the hole. Cut the hole to the size of the sides then that they will pass through the hole and the flanges will press against the face of the console, stabilizing the vent cover and hiding the edges of the hole.

Step 11

Remove the dropped ceiling console from the location where you lot want the vent to go. Cutting the desired size pigsty in the center of the console with a sharp utility knife.

Step 21

Install the vent cover in the hole. Secure information technology to the vent embrace using the method provided with the vent embrace. These methods vary amidst products and may include butterfly clips, screws or leap catches.

Step 31

Pull the flexible vent pipe out through the hole in the dropped ceiling. If the vent that you are extending doesn't have a flexible vent pipe, buy one at any hardware or home comeback store and attach information technology to the existing vent.

Step 41

Connect the flexible vent piping to the backside of the vent cover that you installed in the dropped ceiling panel. Tape them together using duct tape.